Amendment History
Amendment Proposals 2025
| Amendements N° | Contract Ref. | Description | Process | File |
|---|---|---|---|---|
| AP-ECMinGCU | Article 7 Article 12 Article 15 Article 19 Appendix 2 | With Implementing Regulation (EU) 2019/779 and after consultation with the safety authorities, the GCU needs to be adapted in order to continue to ensure legal certainty. | Amendment proposal sent: 05.10.2025 End of voting period: 06.12.2025 Adoption of Proposal: majority Notification re-adoption sent: 09.12.2025 Entering into force: 01.01.2026 |  |
| AP-TTI-2025-01 | Appendix 9 | To align the scope of Appendix 9 with its content, and in the same way as for the ongoing reform of Appendix 10 GCU: under synchronisation, the creation of a clear and non-ambiguous formulation: “if-then” between irregularities and actions to be taken within App 9, as is currently the case in App10. This creates transparency for all parties involved and also forms a basis for subsequent process digitalization and synchronization with App10. | Amendment proposal sent: 06.10.2025 End of voting period: 07.12.2025 Adoption of Proposal: majority Notification re-adoption sent: 09.12.2025 Entering into force: 01.01.2026 | |
| AP-MNT-2025-01 | App. 10 Modules M01.001 / M01.003 | Adaptation of the actions to be taken following thermal overload | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-MNT-2025-02 | App. 10 Chapter B | References to modules in Chapter B App 10 | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-MNT-2025-03 | Appendix 10, Annex 6 CODING OF REPAIR WORK | Update of the requirements for documentation of maintenance modules | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-MNT-2025-04 | App 10, creation of a new Annex 7 | Creation of Annex 7: Damage codes – Modules assignment | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-MNT-2025-05 | App. 10, Module M01.001 | Correction of the module M01.001 wheelset removal/installation | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-MNT-2025-06 | App. 10, Chapter A “Principles” | Explanation of symbols used in the working modules | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-MNT-2025-07 | App 10, Modules M00.002 and M03.003 | Implementation of the JNS Results Gotthard in Appendix 10 GCU | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-MNT-2025-08 | App. 10 Chapter A Point 0.5 | Update the sections of Appendix 10 marked with stars | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-TTI-2025-02 | App. 9. Anhang 1 Code 1.2. and ann 8 | JNS recommendations “Gotthard Base Tunnel” and “broken wheels” | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-TTI-2025-04 | App. 9, Ann 1 | Introducing four categories for “detach wagon” | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 |  |
| AP-TTI-2025-06 | App 9, Main | Terms Wagon loaded / empty | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-TTI-2025-07 | App 9, Ann 1, Point 6.5.2.6 and 6.5.2.7 | Harmonizing measures on technical deficiencies of tanks with RID text | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-TTI-2025-08 | App. 9, Ann 1, Point 1.2.2 | Closing the process gap for wheelsets that can withstand high thermal stresses | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | Included in AP-TTI-2025-02 – see document |
| AP-TTI-2025-09 | App. 9, main text point 3.2.1 | Supplement to basic text 3.2.1 – actuate, move in case of suspicion | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-TTI-2025-10 | App. 9, Ann 1, Point 4.10 | Centre joint connection | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-TTI-2025-12 | App 11, Fig 8.1 | High Voltage Stop – new Pictogram / deletion of remark “obligatory as of 2021” | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
| AP-TTI-2025-13 | App. 9, Point 6.6.1 | Modification of point 6.6.1 | Amendment proposal sent: 30.06.2025 End of voting period: 31.08.2025 Adoption of Proposal: unanimous Notification re-adoption sent: 07.09.2025 Entering into force: 01.01.2026 | |
Amendment Proposals 2024
| Amendements N° | Contract Ref. | Description | Process | File |
|---|---|---|---|---|
| AP-EXT-2024-01 | Appendix 12 | New cost allocation rule for damages on wheels | Amendment proposal sent: 21.06.2024 End of voting period: 21.09.2024 Adoption of Proposal: not adopted Notification re-adoption sent: 27.10.2024 Entering into force: not | |
| AP-MNT-2024-01 | Appendix 10 introduction | The implementation of the modules to restore the fitness to run has shown the need for clarification for “remove/assemble” or “remove / install” | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-02 | Appendix 10 – Principles | Today the sections of the principle are not numbered. Furthermore, the topics welding and lifting are not included in the annex 10 of the GCU. Since these topics were referenced in many modules, the necessity to include them in the principles was given. | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-03 | Appendix 10 | M00.002*: Additional inspections by the workshop | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-04 | Appendix 10 | M01.004: Examination of wheelsets with grease leaks | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-05 | Appendix 10 | M02.004: Helical springs removal/installation | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-06 | Appendix 10 | M02.005: Damper ring removal/installation | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-07 | Appendix 10 | M03.002: Carry out brake test to determine cause of damage | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-08 | Appendix 10 | M03.003: Brake blocks on wagon without compact brake removal/installation | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-09 | Appendix 10 | M03.004: Treat loosen parts of brake rigging | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-10 | Appendix 10 | M03.005: Brake hoses removal/installation | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-11 | Appendix 10 | M03.006: Stopcock removal/installation. | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-12 | Appendix 10 | M03.007: Check brake for leaks | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-13 | Appendix 10 | M03.008: Restore usability of brake isolating cock | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-14 | Appendix 10 | M04.002: Restore connecting elements bogie/underframe | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-15 | Appendix 10 | M04.003: Replace earthing cable | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-16 | Appendix 10 | M04.004: Clean friction sur face(s) of damper system (Y25 bogie) | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-17 | Appendix 10 | M04.005: Repair side bearers | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-18 | Appendix 10 | M04.006: Remove damaged spark arrestor plate | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-19 | Appendix 10 | M05.001: Lubricate buffer | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-20 | Appendix 10 | M05.002: Measure buffer height | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-21 | Appendix 10 | M05.003: Buffer removal/assembly | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-22 | Appendix 10 | M05.004: Renew danger marking | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-23 | Appendix 10 | M05.005: Screw coupler removal/assembly | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-24 | Appendix 10 | M05.006: Replace the parts of the draw gear | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-25 | Appendix 10 | M06.001: Check and correct markings | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-26 | Appendix 10 | M06.002: Restore/replace steps and handles | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-27 | Appendix 10 | M06.003: Repair inscription plates, label holders, and folding plates | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-MNT-2024-28 | Appendix 7, Point 3.2 | Modification of Form HR : Agreement of the keeper must be sought as per Article 19.1 GCU | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-RAP-2024-01 | Appendix 8 | Shorten the feedback period for signatories and abolish the delayed entry into force of amendments that have received only isolated opposition. | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-TTI-2024-04 | App. 9 General Remarks | More detailed description of the measuring method (measurement in mm, minimum sizes) | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-TTI-2024-10 | App. 9, Ann 1, Point5.3.4 | New damage code for defects in the retaining ring of the buffer | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
| AP-TTI-2024-12 | App. 9, Ann 1, Point 7.8.1 | Supplement/precision Code 7.8.1 Codification | Amendment proposal sent: 30.06.2024 End of voting period: 30.09.2024 Adoption of Proposal: unanimous Notification re-adoption sent: 27.10.2024 Entering into force: 01.01.2025 | |
Amendment Proposals 2023
| Amendements N° | Contract Ref. | Description | Process | File |
|---|---|---|---|---|
| AP-MNT-23-01 | Appendix 10, Point 1.17 | Allow the use of further measuring devices | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-02 | Appendix 7 Part A Point 3.1.2 till 3.1.4 Part C 7.1. till 7.4 | Return of spare parts (aligning procedures / consequences for all valuable spare parts like it already is with wheelsets | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-03 | Appendix 10, Annex 4, “no picture” | Annex 4 – Insert an image for “brake block shelling” damage as well as the limit values from Appendix 2 to the Construction Guidelines V – BKS (K), 3rd edition, as of 29.03.2006 | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-04 | Appendix 10, Chapter a | For detached wagons, in accordance with Appendix 9 under maintenance, various sensitive measures which influence the fitness to run or the safety of traffic must be carried out. However, no minimum requirements are specified for the measuring instruments. | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-06 | Appendix 10 Point 6.3.9 | Checking slackened or severed tarpaulin ropes | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-07 | Appendix 10, Point 6.1.2 | handling defective self-unloading wagons with hydraulic equipment | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-08 | Appendix 10, Point 3.8.1 | limit value for the dimensions of the brake block | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-09 | Appendix 10 – modularisation | General section introducing modules in Appendix 10 | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-10 | Appendix 10 – modularisation | M00.001: Keeper instructions to be obtained | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-11 | Appendix 10 – modularisation | M01.001: Wheelset removal/installation | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-12 | Appendix 10 – modularisation | M01.002: EVIC Inspection for axles | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-13 | Appendix 10 – modularisation | M01.003: Handling of wagons after signs of thermal overload of wheelsets | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-14 | Appendix 10 – modularisation | M01.005: Cleaning the faces of the tyres or rims | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-15 | Appendix 10 – modularisation | M02.001: Leaf-spring suspension removal/installation | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-16 | Appendix 10 – modularisation | M02.002: Insert buckle boss | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-17 | Appendix 10 – modularisation | M02.003: Suspension links removal/installation | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-18 | Appendix 10 – modularisation | M03.001: Brake function test | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-MNT-23-19 | Appendix 10 – modularisation | M04.001: Axle-guard tie removal/assembly | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-TTI-23-08 | Appendix 11, Pt 2.7 | Pictogramm for tank capacity in liter Appendix 11 point 2.7 | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
| AP-TTI-23-09 | Appendix 11, Pt 3.2 | The data described under point 3.2 in Appendix 11 are not correct and do not agree with UIC IRS 50596-6 | Amendment proposal sent: 30.06.2023 End of voting period: 30.09.2023 Adoption of Proposal: unanimous Notification re-adoption sent: 08.10.2023 Entering into force: 01.01.2024 | |
Amendment Proposals 2022
| Amendements N° | Contract Ref. | Description | Process | File |
|---|---|---|---|---|
| AP-MNT-2022-02 | Appendix 10 | Alignment / harmonisation with amended Damage code 5.6.1.1 and 5.6.1.2 in App 9 GCU | Amendment proposal sent: 30.06.2022 End of voting period: 30.09.2022 Adoption of Proposal: unanimous Notification re-adoption sent: 23.10.2022 Entering into force: 01.01.2023 | |
| AP-MNT-2022-03 | Appendix 10 | Additional checking criteria for the locking device for center casting kingpin | Amendment proposal sent: 30.06.2022 End of voting period: 30.09.2022 Adoption of Proposal: unanimous Notification re-adoption sent: 23.10.2022 Entering into force: 01.01.2023 | |
| AP-MNT-2022-04 | Appendix 10 | Delete chapter “C” on preventive maintenance and adaption of the maintenance plate in App 11 (see AP-TTI-22-11) | Amendment proposal sent: 30.06.2022 End of voting period: 30.09.2022 Adoption of Proposal: unanimous Notification re-adoption sent: 23.10.2022 Entering into force: 01.01.2023 | |
| AP-MNT-2022-05 | Appendix 10 | Updating of title of Appendix 10 | Amendment proposal sent: 30.06.2022 End of voting period: 30.09.2022 Adoption of Proposal: unanimous Notification re-adoption sent: 23.10.2022 Entering into force: 01.01.2023 | |
| AP-TTI-2022-01 | Appendix 9, annex 4 | Integrate a gauge device for controls and instructions for use | Amendment proposal sent: 30.06.2022 End of voting period: 30.09.2022 Adoption of Proposal: majority Notification re-adoption sent: 23.10.2022 Entering into force: 01.04.2023 | |
| AP-TTI-2022-02 | Appendix 9, point 4.7 | Calculation of error sum value | Amendment proposal sent: 30.06.2022 End of voting period: 30.09.2022 Adoption of Proposal: unanimous Notification re-adoption sent: 23.10.2022 Entering into force: 01.01.2023 | |
| AP-TTI-2022-03 | Appendix 9, annex 2 | Winding direction of Tara Spring | Amendment proposal sent: 30.06.2022 End of voting period: 30.09.2022 Adoption of Proposal: majority Notification re-adoption sent: 23.10.2022 Entering into force: 01.04.2023 | |
| AP-TTI-2022-04 | Appendix 9, annex 1 | New damage code Tarpaulin fuse cable loose or torn | Amendment proposal sent: 30.06.2022 End of voting period: 30.09.2022 Adoption of Proposal: unanimous Notification re-adoption sent: 23.10.2022 Entering into force: 01.01.2023 | |
| AP-TTI-2022-06 | Appendix 9, annex 1 | New damage code on malfunctioning of hydraulic system of the wagon | Amendment proposal sent: 30.06.2022 End of voting period: 30.09.2022 Adoption of Proposal: unanimous Notification re-adoption sent: 23.10.2022 Entering into force: 01.01.2023 | |
| AP-TTI-2022-07 | Appendix 11, annexe 9 | Modification of the text on model I (ability to run) | Amendment proposal sent: 30.06.2022 End of voting period: 30.09.2022 Adoption of Proposal: unanimous Notification re-adoption sent: 23.10.2022 Entering into force: 01.01.2023 | |
| AP-TTI-2022-08 | Appendix 9, annexe 9 | Numbering of the checklist (Procedures to take after incidents) | Amendment proposal sent: 30.06.2022 End of voting period: 30.09.2022 Adoption of Proposal: unanimous Notification re-adoption sent: 23.10.2022 Entering into force: 01.01.2023 | |
| AP-TTI-2022-10 | Appendix 9, annex 1 | Introducing damage codes for wagons with new technical components | Amendment proposal sent: 30.06.2022 End of voting period: 30.09.2022 Adoption of Proposal: unanimous Notification re-adoption sent: 23.10.2022 Entering into force: 01.01.2023 | |
| AP-TTI-2022-12 | Appendix 9, annex 1 | Moving the damage code form 7.7.3 to new address 6.7.5 – hinged safety pins | Amendment proposal sent: 30.06.2022 End of voting period: 30.09.2022 Adoption of Proposal: majority Notification re-adoption sent: 23.10.2022 Entering into force: 01.04.2023 | |
Amendment Proposals 2021
| Amendements N° | Contract Ref. | Description | Process | File |
|---|---|---|---|---|
| AP-GBSG-21-01 | Appendix 16 GCU | GCU Appendix 16 is aligned to legal requirements from TAF TSI (1305/2014) | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-MNT-21-02 | Appendix 10, Chapt. A, 0 Principle | Extension of App. 10 Chapter 0 Principles by an additional sentence concerning the removal of oil crayon markings | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-MNT-21-03 | Appendix 10, Ann 6 | Currently Appendix 10 does not contain any provisions for the disposal of cargo residues | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-MNT-21-05 | Appendix 10, Chapt. A, 0 Principle | As it is not possible to provide a comprehensive account of all repairs and repair options for freight wagons, along with their various risks, a general instruction is to be provided in the “Principle” section so that maintenance can be performed without | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-MNT-21-06 | Appendix 10, Ann. 6 – codes CU60420 and CU60421 | Inclusion of damage codes from Appendix 9: 6.7.1.1, 6.7.1.2 and 6.7.2 in Annex 6 Appendix 10- | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-01 | Appendix 9, Ann. 1, code 4.8.3. | Supplement to the description of Irregularities/Criteria/Notes by 4.8.3 for side bearer fastening | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-03 | Appendix 9. Ann1, Code 1.8.1.1 | axle Box housing (UIP) | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-04 | Appendix 11, point 6.1 | additional sign for axle box housing | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-05 | Appendix 9, Ann1, Code 9.4, | Checklist speed of derailment | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-07 | Appendix 9, annexe1, Code 5.6.1.1. | Screw coupler not lubricated | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-08 | Appendix 9, annexe1, Code 6.6.6 | Discharge flap (!) mechanism broken | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-10 | Appendix 9, annexe1, Code 3.2.4 et 4.3.4. | Superordinate code for complaints regarding noch-coded componentes | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-11 | Appendix 9, annexe1, Code 5.3.3 et 5.4.3 | Grooves on the buffer casing on certain designs | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-13 | Appendix 9, annexe1, Code 4.6.1 | Wagonframe and wheelset | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-16 | Appendix 9, annexe1, Code 6.1.1.5 | Inclusion of holding force [kN] in code 6.1.1.5 | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-17 | Appendix 9, annexe1, | Irregularity class 5 for codes 6.5.2.3 + 6.5.2.5 + 6.5.2.7 | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-18 | Appendix 11, point 2.4 | New figure, load limit grid | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-19 | Appendix 9, annex 1, code 8.2 | Umbrella term for acts of god (force majeure | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-21 | Appendix 9, annex 1, code Code 2.5.6 | Suspension with new/fresh trace | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-22 | Appendix 11, point 3.2 | Conditions and inscriptions on carrier wagon for transport of heavy-duty swap bodies (swap bodies with a total permissible mass of more than 36 000 kg) are mentioned in IRS50571-4 | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
| AP-TTI-21-24 | Appendix 11, point 8.2 | Two pictograms for high voltage warnings are documented in Appendix 11. The exact scope of application for the second (“Stop!”) warning sign is not regulated precisely. The definition proposed here will resolve this issue and will accomplish precise regul | Amendment proposal sent: 30.06.2021 End of voting period: 30.09.2021 Adoption of Proposal: unanimous Notification re-adoption sent: 10.10.2021 Entering into force: 01.01.2022 | |
Amendment Proposals 2020
| Amendements N° | Contract Ref. | Description | File |
|---|---|---|---|
| A2020-01 | Appendix 9, Annex 8, introduction of a new section | Introduction of measures for overloaded wagons Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:majority Notification re-adoption sent:01.10.2020 Entering into force:01.04.2021 | |
| A2020-02 | Appendix 9, Ann. 1 | Amendment of codes 1.4.1 and 1.4.2 in accordance with EN-15313 2016 Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-03 | Appendix 9, Ann. 2 | Amendment of code 6.1.1.2 (following TEN-RIV transition period) and addition of a new code indicating that the “TEN-RIV” marking is not authorised Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-04 | Appendix 11 | Amendment of marking examples under 2.1., Appendix 11 Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-05 | Appendix 9 | Amendment of codes 6.5.2.1 and 7.6.2.1 Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:majority Notification re-adoption sent:01.10.2020 Entering into force:01.04.2021 | |
| A2020-06 | Appendix 9, Ann. 1 | Composite brake block 3.2.2 Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-07 | Appendix 9, Ann. 1 | Loss of load, code 7.1.10 Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-08 | Appendix 9, Ann. 1 | New element: Code 3.2.4.5_ 3.2.4.6 radial fins/circular cooling bars Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-09 | Appendix 9, Ann. 11 | Detection of hidden damage/damage difficult to see Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:majority Notification re-adoption sent:01.10.2020 Entering into force:01.04.2021 | |
| A2020-10 | Appendix 9, Ann. 1 | Handling of wheels that have been subjected to thermal overload (codes 1.2.2 and 1.3.6 and Ann. 8 point 3) Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:majority Notification re-adoption sent:01.10.2020 Entering into force:01.04.2021 | |
| A2020-11 | Appendix 11 | Pictogram: fly and hump shunting not permitted for containers or loaded pocket wagons Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-12 | Appendix 11 | Pictogram of ISO container on wagon with a bogie pivot pitch > 16,15 up to 20.00 m. Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-13 | Appendix 7 New part E | Transfer of provisions on storage of material from Appendix 10 to Appendix 7 GCU Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-14 | Appendix 12 | Extension of Appendix 10 GCU with provisions and examples relating to the transport and storage of wagon wheelsets Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-15 | Appendix 10 | Updating Appendix 10 GCU, Annex 6: code CU 10150 and only in FR and DE versions, adaptation of 10152 and deletion of footnote Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-16 | Appendix 10 | Update to Appendix 10 GCU, Chapter B, Paragraph 3: Overloading Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:majority Notification re-adoption sent:01.10.2020 Entering into force:01.04.2021 | |
| A2020-17 | Appendix 10 | Regulating exceeded concentrated loads in Chapter B, point 3 Appendix 10 GCU Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-18 | Appendix 10 | Implementation of the results from the JNS “Broken Wheels” in 1.18 Chapter A Point 1 Appendix 10 GCU Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:majority Notification re-adoption sent:01.10.2020 Entering into force:01.04.2021 | |
| A2020-19 | Appendix 10 | Implementation of the results from the JNS “Broken Wheels” in 3.6 Chapter A Point 3 Appendix 10 GCU Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-20 | Appendix 10 | Adaptation of the limit values for the height of the flange to those appearing in the Usage guidelines for composite (LL) brake blocks – 10th edition Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:majority Notification re-adoption sent:01.10.2020 Entering into force:01.04.2021 | |
| A2020-21 | Appendix 10 | Adaptation of limit values for flange thickness to EN 15313 Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-22 | Appendix 10 | Extension of Appendix 10 GCU with provisions and examples relating to the transport and storage of wagon wheelsets Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-23 | Appendix 10 | In the GCU specific events are handled according Appendix 10 that mentions additional provisions to be complied with. These provisions might not be sufficient to fulfil the requirements of the keeper’s SMS. Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
| A2020-24 | Appendix 4 | Update Description elements WDR – Appendix 4 Amendment proposal sent:30.06.2020 End of voting period:30.09.2020 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2020 Entering into force:01.01.2021 | |
Amendment Proposals before 2020
| Amendment N° | Contract Ref. | Description | File |
|---|---|---|---|
| A2019-01 | Article 30 | Unlike the former UIC Leaflet 433, which served as a basis for wagon registration contracts and the former RIV 2000 (article 93), the GCU doesn’t contain any provision regarding the right of a creditor to charge interest on a late paying debtor. Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-02 | Appendix 10, Annex 6, introductory text | Specification of the basic information required when providing information on coded interventions. Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-03 | Appendix 10, point 1.1.2 | Insertion of a permissible difference of a maximum of 2 mm for measurement of the distance between inner faces in 1.1.2. Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-04 | Appendix 10, points 2.5.1 and 2.5.2 | Comparison between measurements from Appendix 9 and Appendix 10 Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-05 | Appendix 10, point 3.17 | Abolishment of compulsory inspection of the condition of brake couplings Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-06 | Appendix 10, point 3.7 | Abolishment of compulsory inspection of the condition of cast iron blocks Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-07 | Appendix 10, point 3.8 | Abolishment of compulsory inspection of the condition of composite brake blocks Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-08 | Appendix 10, point 4.19 and Annex 6 (new CU code) | Supplement to 4.19 in accordance with codes 4.6.2.1 and 4.6.2.2 of GCU Appendix 9 Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-09 | Appendix 10, point 5.3 | Abolishment of compulsory inspection of buffer attachment Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-10 | Appendix 10, point 5.6.1 | Clarification that only a visual inspection – without cleaning the buffers – is required when inspecting grooves on the buffer casing/plunger. Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-11 | Appendix 10, points 5.9.1 and 5.9.2 | Amendment to GCU Appendix 9 Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-12 | Appendix 10, point 6.39 and Annex 6 (new CU codes) | Defective tarpaulins are mentioned in Appendix 9, but the corresponding measures to be taken are not provided in Appendix 10. Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-13 | Appendix 10, points 3.7.1, 3.7.2, 3.7.3, 3.8.4 and 3.8.5 | No instructions for replacing brake blocks on double brake block holders are provided in Appendix 10, Part B, Chapter 3. Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-14 | Appendix 11, point 7.9 | Obsolescence of the “U parts” system and corresponding amendment to be made to GCU Appendix 10 Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-15 | Appendix 9, Annex 1, codes 5.1.1 and 5.2.3.1 | Positioning of buffer heads with plastic inserts Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-16 | Appendix 9, Annex 1, new code 7.5.7 | There is currently no code for cases whereby the ILU frame is visibly broken and stability is endangered. By incorporating a code, a uniform coding structure is possible. Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-17 | Appendix 9, Annex 1, code 7.7.5 | Amendment of GCU Appendix 9, Annex 1, Point 7.7.5 in accordance with the amendments to Loading Guidelines 9.4 Volume 2 agreed by the group, namely: The provision for semi-trailer underrun bumpers not being raised/pushed up is not applicable for recess wagons type 1 and 2 and in the case of wagons marked with one of the following compatibility codes: a, b, c or d Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-18 | Appendix 9, Annex 1, Codes 6.5.2.3 up to and including 6.5.2.7 | Code 6.5.2.5 must be altered as it is not consistent with RID 2019. Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2019-19 | Appendix 14, Section 1.2 | Handling and storage of wheelsets in axle-changing facilities Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:majority Notification re-adoption sent:06.10.2019 Entering into force:01.04.2020 | |
| A2019-20 | Appendix 8 | Correction and update of internal regulation Amendment proposal sent:30.06.2019 End of voting period:30.09.2019 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2019 Entering into force:01.01.2020 | |
| A2018-01 | new App. 16, Art. 7.4, App. 1 | The technical vehicle data is the data for rail-way operations and must be provided by the relevant keeper. Supplying this information is the responsibility of the keeper. Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2018 Entering into force:01.01.2019 | |
| A2018-02 | new App. 15, App. 1 | The task of maintaining wagons such that they are fit for service falls to the “Entity in Charge of Maintenance” (ECM). In order to meet these obligations, ECMs require information on the operation of the wagons they maintain. It is the responsibility of the RU which has the wagon in its custody to supply such information. Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:01.10.2018 Entering into force:01.01.2019 | |
| A2018-03 | App. 4 | The wagon damage report (Appendix 4) compiled by the RU is to be prepared in digital format, namely PDF or XML. This is vital in order for better data administration. Appendix 4 needs to be amended to enable standardised digital data transmission, whilst maintaining the prescribed format and content. Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-04 | App. 7 | Update of Appendix 7, parts B and C resulting in the removal of the obsolete term “U parts” from the appendix and the addition of a consolidated list of spare parts. Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-05 | App. 9 | Irregularities on buffer heads, including plastic inserts. Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-06 | App. 9 | Amendments to codes 6.5.2.3 and 6.5.2.4 are necessary since the RID 2017 has evolved as far as test dates are concerned (4.3.2.3.7). Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-07 | App. 9 | Amendment of overload procedure in accordance with EN 15313-2016 Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-08 | App. 9 | Introduction of code 6.6.1.4 Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-09 | App. 9 | Change of defect category 4 to defect category 5 Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-10 | App. 9 | Precision regarding locking doors of load units (ILUs) – code 7.5.2 Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-11 | App. 10 | Adaptation of the principles of Chapter A Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-12 | App. 10 | Inclusion in Appendix 10 of the points relating to cracks on the wheel tread described in EN 15313 Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-13 | App. 10 | The amendment will provide an indication of how to handle the wagon in order to remove traces of thermal overload and monitor the status of the brake system. Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-14 | App. 10 | Introduction of axle generators and pumps to be mounted onto components’ axles, establishing a connection with the vehicle underframe. The new point aims to describe the mode of operation to be used for such axles. Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-15 | App. 10 | Adjustments to be made after replacement of brake blocks or wheelsets in accordance with UIC Leaflet 543-1. Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-16 | App. 10 | Deletion of * in points 6.28 to 6.38 of Chapter A of Appendix 10 Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:not adopted Notification re-adoption sent:30.09.2018 Entering into force: | |
| A2018-17 | App. 10 | Updating Chapter B (dealing with wagons after specific incidents) with integration of standard EN 15313:2016 Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-18 | App. 10 | Editorial aspects of Annex 4 have been revised and additional sample images added Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-19 | App. 11 | Description of holding force on wagons equipped with screw brakes in accordance with UIC Leaflet 545, point 4.2. Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-20 | App. 14 – Part B | The advantages of the new Part B of Appendix 14: clarity, precision, harmonisation, standardisation, elimination of elements that are out of date. Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-21 | App. 10 | Corrective maintenance of RID tank wagons. Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019Corrective maintenance of RID tank wagons. Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-22 | App. 9 | Adjustment of code 1.8.3, in 1.8.3.1 and 1.8.3.2 Amendment proposal sent:30.06.2018 End of voting period:30.09.2018 Adoption of Proposal:unanimous Notification re-adoption sent:30.09.2018 Entering into force:01.01.2019 | |
| A2018-23 | Art. 19 | In order to realise the objectives aimed for by the ECM Regulation/Annex A to Appendix G to the 1999 COTIF within the scope of the GCU, some passages of the GCU must be adjusted and new definitions incorporated. The proposed amendments create a set of unambiguous GCU provisions for the vehicle fleet maintenance management and maintenance delivery functions. Amendment proposal sent:10.08.2018 End of voting period:10.11.2018 Adoption of Proposal:unanimous Notification re-adoption sent:21.11.2018 Entering into force:01.07.2019 | |
| A2017-01 | Appendix 2 & 11 | In Appendix 11 point 4.2, a measure is provided for under Remark 2. This remark can be deleted from Appendix 11 because Appendix 11 contains a description of the markings and signs on wagons, not actions to be taken. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-02 | Appendix 9 | Define what is meant in Appendix 9 by “Detach wagon” as an action to be taken in a separate point 3.2.5 / 3.2.6, Action to be taken “Detach wagon”, column (4); Definition”. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-03 | Appendix 11 | Add a marking on wagons with screw brakes to indicate the holding force available, as stipulated by UIC Leaflet 545, point 4.2. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-04 | Appendix 9 | New code 1.8.4: Hard manganese wear plate on axle box Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-05 | Appendix 9 | Adapt wording of Annex 8, point 4 as regards the use of derailment detectors. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-06 | Appendix 9 | Under Code 3.3.5.2, the action to be taken should be to affix a “K” label and rectify the problem. Code 3.3.5.2 should then foresee the further action “detach wagon” in cases where rectification is not possible. Merely affixing a “K” label is not sufficient for this defect. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-07 | Appendix 9 | The action to be taken and the defect category under Code 5.9.1 both need to be modified since a long-stroke damper which is off-centre can foul the loading gauge. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-08 | Appendix 11 | GCU Appendix 11 currently contains only one warning sign for high voltage (a lightning flash). This amendment proposes to include in GCU Appendix 11 the other warning sign for high voltage, as set out in DIN EN 15877-1:2012-12. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-09 | Appendix 9 | In order to reduce noise, various train formation yards with gravity humps apply friction modifiers to the inner and outer faces of the wagon wheel. The application of such products is not a reason to detach wagons, and should be included under Code 1.3.7 as an exception. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-10 | Appendix 9 | Annex 1, code 8.1: additional handling of the wagon following irregularities in operations: No need for a three-point measurement of the wheelset on wagons having sustained an “abnormal buffering shock” (irregularities in operations). Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-11 | Appendix 11 | A specific marking/pictogram is required on railway recess wagons suitable to carry semi-trailers with steering wedges. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-12 | Appendix 9 | Adapt the wording of points 1.2 and 4.4, “Planning of tests”. In the context of multilateral RU-RU relations and the further enhancement of the QMS, the wording of Appendix 9, points 1.2 and 4.4 (main text on QMS) needs to be revised. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-13 | Appendix 9 | Addition concerning removable wagon components: trestle locking device Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-14 | Appendix 10, Art 3.20 | Broken or missing brake release pulls are to be replaced. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-15 | Appendix 7, Part B | Remove the outmoded term “U part” and insert a list of standard spare parts Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-16 | Appendix 7, Model HR | Adjust Form HR in line with the new Appendix 10 Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-17 | Appendix 10, Art 4.14 | Adapt the provisions on damage to side bearers and, in particular, their fastening, in line with the new Appendix 9 Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-18 | Appendix 10, 1.6.1, 1.6.2 and 1.18 | Ensure that the rules governing composite brake blocks (LL) are applied to wheelsets on wagons fitted with LL blocks during every trip to the workshop. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-19 | Appendix 10, Chapter C | Align “Chapter C – Preventive maintenance” with (EU) Regulation 445/2011 Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-20 | Appendix 10, Annex 3, Art 2.2 | Since EN 473 ceased to apply on 1.3.2013, the current reference should be replaced by a reference to EN ISO 9712. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-21 | Appendix 6 & Article 23.2 | Amendment of Appendix 6 and to propose a compensation payment of 350€. Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2017-22 | Appendix 8 | Overhault of Appendix 8 Amendment proposal sent:30.06.2017 End of voting period:30.09.2017 Adoption of Proposal:unanimous Notification re-adoption sent:03-10-2017 Entering into force:01-01-2018 | |
| A2016-01 | Article 15.2 | The current article 15 does not reflect the obligations and measures provided for by the TAF TSI. Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:majority Notification re-adoption sent:09.10.2016 Entering into force:01.04.2017 | |
| A2016-02 | Article 27 Article 7 | The current Article 27 is incomplete as regards the determination of fault. The basis of keeper liability is not explicitly stated. Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:unanimous Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2016-03 | Appendix 9 code 6.1.1.8 | Add a code to Appendix 9, Annex 1, stipulating the need for a vehicle keeper marking, as provided for by EN 15877-1 (2012). Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:majority Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2016-04 | Appendix 9 code 7.6.4.11 and 6.5.5.12 | Adjustment of the action to be taken for codes 7.6.4.11 and 6.5.5.12. For RID loads, unscrewing the emergency control device is not an acceptable remedy for reasons of occupational safety. Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:unanimous Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2016-05 | Appendix 9 code 6.7.6 | Change the term “Anti-crash element” to the broader “Anti-crash system” – code 6.7.6 Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:unanimous Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2016-06 | Appendix 9 code 6.7.1 | Modify code 6.7.1 : Better description of defects securing ILU with specific codes for trestles and pigots Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:unanimous Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2016-07 | Appendix 10 Art 1.35 | Article 1.35 of Appendix 10 clarifies what information must be entered on Form Hr when an axle is replaced. The new Form Hr will require information on the diameters of the axles on the wagon. This clarification must be entered under point 1.35. Furthermore, it appears necessary to clarify that the diameter “B” to be entered on Form Hr is a measured value and not a nominal diameter. Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:majority Notification re-adoption sent:09.10.2016 Entering into force:01.04.2017 | |
| A2016-08 | Appendix 10 Annex 3 chap B point 2.1 | Traceability of EVIC inspection Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:majority Notification re-adoption sent:09.10.2016 Entering into force:01.04.2017 | |
| A2016-09 | Appendix 10 section 6 | Bring together all text dealing with handrails and steps in section 6: Vehicle body. Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:unanimous Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2016-10 | Appendix 10 point 5.9.1 | Align point 5.9 with the tolerance values in Appendix 9, point 5.2.3.2. Appendix 10 currently does not indicate the permitted dimensions for grooves. Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:unanimous Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2016-11 | Appendix 10 point 5.9.2 | Appendix 10 currently does not indicate the permitted dimensions for grooves on buffer plates with wear pads. Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:unanimous Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2016-12 | Appendix 10 point 5.13 | Define limit value for play between chain link and screw. Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:unanimous Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2016-13 | Appendix 10 point 5.14.1 | Include concept of greasing screw couplers. Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:unanimous Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2016-14 | Appendix 7 | Add code 1.8.4 to Form Hr as a reason for withdrawal from service. Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:unanimous Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2016-15 | Appendix 10 point 3.6 | No description of the method to be used to get rid of the problem of protruding blocks. Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:unanimous Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2016-16 | Art 34 | Article 34: Languages Amendment proposal sent:30.06.2016 End of voting period:30.09.2016 Adoption of Proposal:unanimous Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2016-17 | Appendix 9 codes 6.5.5.x and 7.6.4.x | Adjustment of codes 6.5.5.x and 7.6.4.x in line with UIC Leaflet 471-3 Amendment proposal sent:01.07.2016 End of voting period:01.10.2016 Adoption of Proposal:unanimous Notification re-adoption sent:09.10.2016 Entering into force:01.01.2017 | |
| A2015-01 | App. 4 | New Wagon Damage Report Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:majority Notification re-adoption sent:07.10.2015 Entering into force:01.04.2016 | |
| A2015-02 | App. 9 | Clarification of grooves, furrows/hollows and false flanges Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:unanimity Notification re-adoption sent:07.10.2015 Entering into force:01.01.2016 | |
| A2015-03 | App. 9 | Codes 5.6.1 Clarification of action to be taken Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:unanimity Notification re-adoption sent:07.10.2015 Entering into force:01.01.2016 | |
| A2015-04 | App. 9 | Entry of a new fault code for derailment detectors, codes 3.3.1.2 to 3.3.1.4 Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:unanimity Notification re-adoption sent:07.10.2015 Entering into force:01.01.2016 | |
| A2015-05 | App. 9 | Proposal for defining the point 2.3, Appendix 9 “Minimum required skills for inspectors” Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:unanimity Notification re-adoption sent:07.10.2015 Entering into force:01.01.2016 | |
| A2015-06 | App. 9 | Change of point 4 of Checklist: expired period and point 3 of Checklist: irregularities in operations in Appendix 9 Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:unanimity Notification re-adoption sent:07.10.2015 Entering into force:01.01.2016 | |
| A2015-07 | App. 9 | Change of Point 1 of checklists (Appendix 9) Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:unanimity Notification re-adoption sent:07.10.2015 Entering into force:01.01.2016 | |
| A2015-08 | App. 11 | Clarify “CT” marking in Appendix 11 Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:unanimity Notification re-adoption sent:07.10.2015 Entering into force:01.01.2016 | |
| A2015-09 | App. 11 | Request for modification of markings – use of composite brake blocks Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:unanimity Notification re-adoption sent:07.10.2015 Entering into force:01.01.2016 | |
| A2015-10 | App. 11 | Creating of marking: 5.14 Appendix 11 Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:majority Notification re-adoption sent:07.10.2015 Entering into force:01.04.2016 | |
| A2015-11 | App. 9 | Code adaptation 1.3.3. and 1.3.5 in conformity to EN 15313 Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:unanimity Notification re-adoption sent:07.10.2015 Entering into force:01.01.2016 | |
| A2015-12 | App. 10 | Change of Art. 1.6: upper limit regarding wheel flats Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:unanimity Notification re-adoption sent:07.10.2015 Entering into force:01.01.2016 | |
| A2015-13 | Art. 14.2 | Legal basis for using empty wagon conveyance documents in electronic format Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:unanimity Notification re-adoption sent:07.10.2015 Entering into force:01.01.2016 | |
| A2015-14 | App. 7 | Revision of Appendix 7 Amendment proposal sent:30.06.2015 End of voting period:30.09.2015 Adoption of Proposal:unanimity Notification re-adoption sent:07.10.2015 Entering into force:01.01.2016 | |
| A2014-01 | Article 17 | Acceptance from wagons from third parties Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2014-02 | Article 19.5 | Clarification “approved workshop & staff” Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2014-03 | Appendix 1 | Information to be provided by signatories Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2014-04 | Appendix 9 | Modification of annex 1: Clarification of three point measurement Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2014-05 | Appendix 9 | Annex 1: Procedure for thermal overload on wheel sets Annex 8 point 3 Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2014-06 | Appendix 9 | Modification of Annex 1: No. 6.1.2 Overhaul Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2014-07 | Appendix 9 | Modification of Annex 1: No. 6.7.1.2 action to be taken Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2014-08 | Appendix 10 | New Article 3.8.3 (Composite brake blocks) Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2014-09 | App 10 new annex 6 | Coding list for interventions Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2014-10 | Article 23 | Compensation on damaged wheel sets Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:not adopted Notification re-adoption sent:11.10.2014 Entering into force:— | |
| A2014-11 | Appendix 9 | Modification of Annex 1: codes 3.2.4 – 3.2.6: integration of disc brakes Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2014-12 | Appendix 9 | Modification of Annex 1: Modification of chapters 6 and 7 incl. ILE Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2014-13 | Appendix 9 | Modification of Annex 1: Build-up of metal No. 1.3.4 Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2014-14 | Appendix 10 | Amended annex 3 (EVIC/delete ‘reporting’) Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2014-15 | Appendix 11 | Modification of point 3.2 update to the list with compatibility code ‘i’ Amendment proposal sent:30.06.2014 End of voting period:30.09.2014 Adoption of Proposal:unanimous Notification re-adoption sent:11.10.2014 Entering into force:01.01.2015 | |
| A2013-01 | Appendix 10 Appendix 7 | Instructions to be complied with when recording leaks of lubricant from axle boxes. To assure the traceability of wheelsets it’s necessary to introduce the individual number of the wheelset that has to be replaced (Form HR). Amendment proposal sent:05.03.2013 End of voting period:05.06.2013 Adoption of Proposal:unanimous Notification re-adoption sent:09.06.2013 Entering into force:01.01.2014 | |
| A2013-02 | Appendix 10 | Modification of point 3.6 to clarify who receives the results of brake tests Amendment proposal sent:26.06.2013 End of voting period:26.09.2013 Adoption of Proposal:unanimous Notification re-adoption sent:29.09.2013 Entering into force:01.01.2014 | |
| A2013-03 | Appendix 10 | Align text with appendix 9 Amendment proposal sent:26.06.2013 End of voting period:26.09.2013 Adoption of Proposal:unanimous Notification re-adoption sent:29.09.2013 Entering into force:01.01.2014 | |
| A2013-04 | Appendix 9 annex 1 | Introduction of new code 4.8.3 Amendment proposal sent:26.06.2013 End of voting period:26.09.2013 Adoption of Proposal:unanimous Notification re-adoption sent:29.09.2013 Entering into force:01.01.2014 | |
| A2013-05 | Appendix 9 annex 1 | Improved description of irregularities under codes 5.3.3 and 5.2.3.2 Amendment proposal sent:26.06.2013 End of voting period:26.09.2013 Adoption of Proposal:unanimous Notification re-adoption sent:29.09.2013 Entering into force:01.01.2014 | |
| A2013-06 | Appendix 9 annex 1 | Various modifications in section 6 and 7. Amendment proposal sent:26.06.2013 End of voting period:26.09.2013 Adoption of Proposal:unanimous Notification re-adoption sent:29.09.2013 Entering into force:01.01.2014 | |
| A2013-07 | Appendix 9 annex 1,8 | New action to be taken with code 7.1.2. Illustration of overloaded wheelsets to facilitate understanding. Amendment proposal sent:26.06.2013 End of voting period:26.09.2013 Adoption of Proposal:unanimous Notification re-adoption sent:29.09.2013 Entering into force:01.01.2014 | |
| A2013-08 | Appendix 1 | Add option to specify RUs’/keepers’ central billing addresses Amendment proposal sent:26.06.2013 End of voting period:26.09.2013 Adoption of Proposal:unanimous Notification re-adoption sent:29.09.2013 Entering into force:01.01.2014 | |
| A2013-09 | Appendix 14 | Conditions for changing wheelsets at the Franco-Iberian border. Amendment proposal sent:26.06.2013 End of voting period:26.09.2013 Adoption of Proposal:unanimous Notification re-adoption sent:29.09.2013 Entering into force:01.01.2014 | |
| A2013-10 | Article 34 | Use of national languages Amendment proposal sent:26.06.2013 End of voting period:26.09.2013 Adoption of Proposal:unanimous Notification re-adoption sent:29.09.2013 Entering into force:01.01.2014 | |
| A2013-11 | Appendix 5 | Various modifications Amendment proposal sent:12.07.2013 End of voting period:12.10.2013 Adoption of Proposal:unanimous Notification re-adoption sent:15.10.2013 Entering into force:01.01.2014 | |
| A2013-12 | Appendix 9 Appendix 11 | Implementation will necessarily take place due to the mandatory updates to the GCU arising in the light of Commission regulation (EU) No 321/2013 of 13 March 2013 concerning the technical specification for interoperability relating to the subsystem ‘rolling stock — freight wagons’ of the rail system in the European Union. Amendment proposal sent:03.12.2013 End of voting period:03.03.2014 Adoption of Proposal:unanimous Notification re-adoption sent:05.03.2014 Entering into force:05.06.2014 | |
| A2012-1 (set of 7 amendments) | Mandatory technical condition of wagons for reciprocal handover between two or more railway undertakings (RUs) | ||
| A2012-1.1 | Appendix 9 | Proposal 1 Amendment proposal sent:30.06.2012 End of voting period:30.09.2012 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2012 Entering into force:01.01.2013 | |
| A2012-1.2 | Appendix 9 | Proposal 2 Amendment proposal sent:30.06.2012 End of voting period:30.09.2012 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2012 Entering into force:01.01.2013 | |
| A2012-1.3 | Appendix 9 | Proposal 3 Amendment proposal sent:30.06.2012 End of voting period:30.09.2012 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2012 Entering into force:01.01.2013 | |
| A2012-1.4 | Appendix 9 | Proposal 4 Amendment proposal sent:30.06.2012 End of voting period:30.09.2012 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2012 Entering into force:01.01.2013 | |
| A2012-1.5 | Appendix 9 | Proposal 5 Amendment proposal sent:30.06.2012 End of voting period:30.09.2012 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2012 Entering into force:01.01.2013 | |
| A2012-1.6 | Appendix 9 | Proposal 6 Amendment proposal sent:30.06.2012 End of voting period:30.09.2012 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2012 Entering into force:01.01.2013 | |
| A2012-2 | Appendix 11 Appendix 14 | Mandatory technical condition of wagons for reciprocal handover between two or more railway undertakings (RUs) – Proposal 7 Transfer of annex 1 to 3 of appendix 11 to the new appendix 14 Amendment proposal sent:30.06.2012 End of voting period:30.09.2012 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2012 Entering into force:01.01.2013 | |
| A2012-3 | Appendix 10 | Full revision of the Appendix 10 : alignment of French and German versions, and modifications prepared by the Maintenance WG, in particular the addition of an Annex 4 for K blocks. Amendment proposal sent:30.06.2012 End of voting period:30.09.2012 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2012 Entering into force:01.01.2013 | |
| A2012-4 | Appendix 3 | New CUV wagon note template for combined transport Amendment proposal sent:30.06.2012 End of voting period:30.09.2012 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2012 Entering into force:01.01.2013 | |
| A2012-5 | Article 14 Appendix 3 | Addition of the conditions of conveyance of empty wagons, especially in case of extraordinary events Amendment proposal sent:30.06.2012 End of voting period:30.09.2012 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2012 Entering into force:01.01.2013 | |
| A2012-6 | Article 3 Article 5 | Monthly publication of the GCU-admissions or terminations Amendment proposal sent:30.06.2012 End of voting period:30.09.2012 Adoption of Proposal:unanimous Notification re-adoption sent:06.10.2012 Entering into force:01.01.2013 | |
| A2012-7 | Article 19 Article 22 | The cost of repair below which the agreement of the Keeper is not required, increases from 750 € to 850 €. Amendment proposal sent:30.06.2012 End of voting period:30.09.2012 Adoption of Proposal:majority Notification re-adoption sent:06.10.2012 Entering into force:01.04.2013 | |
| A2012-8 | Article 7 | Binding communication of technical documentation and instructions for new and transformed wagons Amendment proposal sent:06.08.2012 End of voting period:06.11.2012 Adoption of Proposal:unanimous Notification re-adoption sent:10.11.2012 Entering into force:01.01.2013 | |
| A2011-4 | App. 9 | Several modifications Amendment proposal sent:09.08.2011 End of voting period:09.11.2011 Adoption of Proposal:unanimous Notification re-adoption sent:28.11.2011 Entering into force:01.12.2011 | |
| A2011-3 | App. 13 Art. 19 | List of small repairs Amendment proposal sent:13.03.2011 End of voting period:19.06.2011 Adoption of Proposal:majority Notification re-adoption sent:26.09.2011 Entering into force:01.01.2012 | |
| A2011-2 | Art. 11 | Additional condition of refusal for a wagon Amendment proposal sent:13.03.2011 End of voting period:19.06.2011 Adoption of Proposal:unanimous Notification re-adoption sent:26.09.2011 Entering into force:19.09.2011 | |
| A2011-1 | App. 7 | Adding codes for the station of delivery Amendment proposal sent:13.03.2011 End of voting period:19.06.2011 Adoption of Proposal:unanimous Notification re-adoption sent:26.09.2011 Entering into force:19.09.2011 | |
| A2010-2 | App. 10 | Introduction of EVIC (new annex 3) Amendment proposal sent:30.07.2010 End of voting period:30.10.2010 Adoption of Proposal:majority Notification re-adoption sent:26.11.2010 Entering into force:01.05.2011 | |
| A2010-1 | App. 8 | Introduction of wagon database Amendment proposal sent:29.03.2010 End of voting period:29.06.2010 Adoption of Proposal:unanimous Notification re-adoption sent:30.06.2010 Entering into force:01.10.2010 | |
| A2009-2 | App. 2 Art. 7/9 | Changes to Chapter II Art. 7 and 9 and Appendix 2 Amendment proposal sent:20.03.2009 End of voting period:20.06.2009 Adoption of Proposal:unanimous Notification re-adoption sent:13.07.2009 Entering into force:13.10.2009 | |
| A2009-1 | App. 8 Art. 3 | Changes to Chapter I Art. 3 and Appendix 8 Amendment proposal sent:20.03.2009 End of voting period:20.06.2009 Adoption of Proposal:unanimous Notification re-adoption sent:13.07.2009 Entering into force:13.10.2009 | |
| A2008-3 | App. 10 | Corrective and preventive maintenance Amendment proposal sent:07.07.2008 End of voting period:07.10.2008 Adoption of Proposal:unanimous Notification re-adoption sent:16.03.2009 Entering into force:16.06.2009 | |
| A2008-2 | App. 11 | Inscriptions and signs on wagons Amendment proposal sent:24.04.2008 End of voting period:24.07.2008 Adoption of Proposal:unanimous Notification re-adoption sent:16.03.2009 Entering into force:16.06.2009 | |
| A2008-1 | App. 9 | Conditions for the technical transfer inspection of wagons Amendment proposal sent:21.04.2008 End of voting period:21.07.2008 Adoption of Proposal:unanimous Notification re-adoption sent:16.03.2009 Entering into force:16.06.2009 |  |
| Original Version of GCU | |||